Filter
Top Products
ZyAIR B-5000 Quick Installation Guide
8
Figure 8 - Inline Power Injector Front Panel
3.5 Making the Connections
Before installing your Outdoor Access Point & Bridge system in a hard-to-reach location, we recommend
that you configure and test all the devices first.
Follow the quick steps below for installation of the Outdoor Access Point & Bridge:
3.5.1 Procedure for Making the Connections
Step 1. With the unit turned off, attach the dipole antenna to the antenna connector as shown
in Figure 9.
Do not over-tighten the antennas. Position the antenna vertically for the best
omni-directional signal reception.
POWER
ACTIVE