Filter
Top Products
Chapter 5 Tutorials
GS1910/XGS1910 Series User’s Guide
62
9 Click Save.
10 Configure both the router port and the ports to which the multicast clients connect as a member of
VLAN 1234. See Section 5.4 on page 38 for how to create a VLAN and configure ports to join the
VLAN.
11 Go to Configuration > IPMAC > IGMP Snooping > VLAN Configuration.
12 Select Snooping Enabled for VLAN 1234 to allow the Switch to learn the IP multicast group
membership of this VLAN.
13 Select IGMP Querier for VLAN 1234 to allow the Switch to act as the querier in the VLAN to send
IGMP General Query (GQ) and Group-Specific Query (GSQ) messages to this VLAN. A querier sends
out an IGMP Group-Specific Query (GSQ) message to determine whether the hosts connected to
the port should remain in the specific multicast group.