IDP Support Notes
40
stateful
<ON/OFF>
Enable/disable TCP state check
integrity
<ON/OFF>
Setup TCP idle timeout
tcptimeout
<value>
Setup maximum ping length
pinglen <value> Setup maximum ping packet number per second
pingmax <value> wan Setup maximum ping packet accepted at wan port
lan Setup maximum ping packet accepted at lan port
policy wan <ON/OFF> Setup policy check on/off wan port
lan <ON/OFF> Setup policy check on/off loan port
interface link wan 10 <half/full> Setup wan port speed 10/100; full/half duplex
100 <half/full>
auto <half/full> Enable auto negotiation
lan 10 <half/full> Setup lan port speed 10/100; full/half duplex
100 <half/full>
auto <half/full> Enable auto negotiation
stealth wan <ON/OFF> Enable/disable stealth mode on wan port
lan <ON/OFF> Enable/disable stealth mode on lan port
remote snmp on
<LAN+MGMT/WA
N+MGMT/MGMT/
ALL>
Enable remote snmp access from
LAN+MGMT/WAN+MGMT/MGMT ONLY/ALL port
off Disable remote snmp access
acl <ip address> Setup access control list ip address
commnuity ro <value> Setup community read only string
rw <value> Setup community read/write string
trap <value> Setup snmp trap
system name
<value>
Setup remote snmp system name
trap <ON/OFF> Enable/disable remote snmp trap
trap ip <value> Setup remote snmp trap send to ip address
ssh on
<CAN+MGMT/W
AN+MGMT/MGM
T/ALL>
Enable remote SSH access from
LAN+MGMT/WAN+MGMT/MGMT ONLY/ALL port
All contents copyright (c) 2004 ZyXEL Communications Corporation.