Filter
Top Products
Chapter 15 Static Route
NBG-417N User’s Guide
148
15.2 What You Can Do in the IP Static Route
Screens
•Use the IP Static Route screen (Section 15.3 on page 148) to view existing
static route rules.
•Use the Static Route Setup screen (Section 15.3.1 on page 149) to add or edit
a static route rule.
15.3 IP Static Route Screen
Use this screen to view existing static route rules. Click Management > Static
Route to open the IP Static Route screen. The following screen displays.
Figure 78 Management > Static Route > IP Static Route
The following table describes the labels in this screen.
Table 50 Management > Static Route > IP Static Route
LABEL DESCRIPTION
# This is the index number of an individual static route. The first entry is
for the default route and not editable.
Name This is the name that describes or identifies this route.
Active This icon is turned on when this static route is active.
Click the Edit icon under Modify and select the Active checkbox in the
Static Route Setup screen to enable the static route. Clear the
checkbox to disable this static route without having to delete the entry.
Destination This parameter specifies the IP network address of the final destination.
Routing is always based on network number.