Filter
Top Products
Chapter 21 Tools
NBG-417N User’s Guide
189
21.4.2 Restore Configuration
Restore configuration allows you to upload a new or previously saved
configuration file from your computer to your NBG-417N.
Note: Do not turn off the NBG-417N while configuration file upload is in progress
After you see a “configuration upload successful” screen, you must then wait one
minute before logging into the NBG-417N again.
Figure 108 Configuration Restore Successful
The NBG-417N automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 109 Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default NBG-
417N IP address (192.168.1.1). See Appendix D on page 229 for details on how to
set up your computer’s IP address.
Table 62 Maintenance Restore Configuration
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click
Browse... to find it.
Browse... Click Browse... to find the file you want to upload. Remember that you
must decompress compressed (.ZIP) files before you can upload them.
Upload Click Upload to begin the upload process.