Filter
Top Products
Chapter 7 Wireless LAN
NBG-417N User’s Guide
76
7.2 What You Can Do In the Wireless LAN Screen
•Use the General screen (Section 7.4 on page 79) to enable the Wireless LAN,
enter the SSID and select the wireless security mode.
•Use the MAC Filter screen (Section 7.5 on page 84) to allow or deny wireless
stations based on their MAC addresses from connecting to the NBG-417N.
•Use the Advanced screen (Section 7.6 on page 86) to allow intra-BSS
networking and set the RTS/CTS Threshold.
•Use the QoS screen (Section 7.7 on page 87) to ensure Quality of Service (QoS)
in your wireless network.
•Use the WPS screen (Section 7.8 on page 91) to quickly set up a wireless
network with strong security, without having to configure security settings
manually.
•Use the WPS Station screen (Section 7.9 on page 92) to add a wireless station
using WPS.
•Use the Scheduling screen (Section 7.10 on page 92) to set the times your
wireless LAN is turned on and off.
7.3 What You Should Know About Wireless LAN
Every wireless network must follow these basic guidelines.
• Every wireless client in the same wireless network must use the same SSID.
The SSID is the name of the wireless network. It stands for Service Set IDentity.
• If two wireless networks overlap, they should use different channels.
Like radio stations or television channels, each wireless network uses a specific
channel, or frequency, to send and receive information.
• Every wireless client in the same wireless network must use security compatible
with the AP.
Security stops unauthorized devices from using the wireless network. It can also
protect the information that is sent in the wireless network.
7.3.1 Wireless Security Overview
The following sections introduce different types of wireless security you can set up
in the wireless network.
7.3.1.1 SSID
Normally, the AP acts like a beacon and regularly broadcasts the SSID in the area.
You can hide the SSID instead, in which case the AP does not broadcast the SSID.