Filter
Top Products
Chapter 16 Bandwidth Management
NBG-417N User’s Guide
153
The following table describes the labels in this screen.
16.5 Bandwidth Management Advanced
Configuration
Use this screen to configure bandwidth managements rule for the pre-defined
services or applications.
Use this screen to configure bandwidth managements rule for specific protocols on
an IP or IP range.
Note: This screen contains the Priority Queue and Bandwidth Allocation tables.
Though both tables are described in this section, you can only apply the rules in
one table. Fill out the table of the Bandwidth Management Type you selected
in Section 16.4 on page 152
Table 52 Management > Bandwidth MGMT > General
LABEL DESCRIPTION
Service Management
Bandwidth
Management
Type
This field allows you to have NBG-417N apply bandwidth
management.
Select Priority Queue or Bandwidth Allocation to enable
bandwidth management.
Select Priority Queue to allocate bandwidth based on the pre-defined
priority assigned to an application. Refer to Section 16.5 on page 153.
Select Bandwidth Allocation allocate specific amounts of bandwidth
to specific protocols on an IP or IP range. Refer to Section 16.5 on
page 153.
Select Disable if you do not want to use this feature.
Total Bandwidth Setting. The fields below appear when you enable Bandwidth
Management.
Uplink Select the total amount of bandwidth (from 64 Kilobits to 30 Megabits)
that you want to dedicate to uplink traffic.
This is traffic from LAN/WLAN to WAN.
Downlink Select the total amount of bandwidth (from 64 Kilobits to 30 Megabits)
that you want to dedicate to uplink traffic.
This is traffic from WAN to LAN/WLAN.
Apply Click Apply to save your customized settings.
Reset Click Reset to begin configuring this screen afresh.