Filter
Top Products
Chapter 17 Remote Management
NBG-417N User’s Guide
161
17.4 WWW Screen
To change your NBG-417N’s World Wide Web settings, click Management >
Remote MGMT to display the WWW screen.
Figure 84 Management > Remote MGMT > WWW
The following table describes the labels in this screen
Table 56 Management > Remote MGMT > WWW
LABEL DESCRIPTION
Server Port You may change the server port number for a service if needed,
however you must use the same port number in order to use that
service for remote management.
Server Access Select the interface(s) through which a computer may access the NBG-
417N using this service.
Secured Client
IP Address
A secured client is a “trusted” computer that is allowed to communicate
with the NBG-417N using this service.
Select All to allow any computer to access the NBG-417N using this
service.
Choose Selected to just allow the computer with the IP address that
you specify to access the NBG-417N using this service.
Note: This only applies on WAN IP.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.