Filter
Top Products
Chapter 2 ZyXEL Utility
NPS-520 User’s Guide
24
The following table describes the labels in this screen.
2.6 The TCP/IP Setting Screen
Use this screen to configure the NPS-520’s TCP/IP settings, such as IP address, subnet mask
and gateway.
When you click the TCP/IP Setting tab, the following login screen displays. Select the name
of your NPS-520 and enter the password (1234 by default).
Figure 7 ZyXEL Utility: Login
After you click OK, the TCP/IP Setting screen appears.
Table 5 ZyXEL Utility: General Setting
LABEL DESCRIPTION
General Setting
Run ZyXEL Print
Server Utility when
Windows starts
Select this check box to have the ZyXEL utility open automatically each time
you start Windows.
Run minimized mode
in system when starts
ZyXEL Print Server
Utility
Select this check box to minimize the ZyXEL utility screen each time you start
the utility. To restore it, double-click the utility icon in the system tray.
User’s Contact
Information
Enter your contact information (of up to 15 printable characters long), such as
your location.
Save Click this button to save your changes to the NPS-520.
Cancel Click this button to return to the Status screen without saving changes.