Filter
Top Products
Chapter 2 ZyXEL Utility
NPS-520 User’s Guide
28
Upgrade Click Upgrade to begin the upload process.
The following screen displays when the upload is successful. Click OK to go
back to the System Setting screen.
Note: Only upload firmware for your specific model.
Note: Do not turn off the NPS-520 while firmware upload is in
process.
Reset to factory
default
Click OK to clear all user-entered configuration information and return the NPS-
520 to its factory defaults.
When the following displays, click OK to go back to the System Setting
screen.
You can also use the hardware Reset button to reset the factory defaults of
your NPS-520. See Section 1.5 on page 16 for more information on the Reset
button.
Table 7 ZyXEL Utility: System Setting (continued)
LABEL DESCRIPTION