Filter
Top Products
Prestige 202H Plus Quick Start Guide
12
4.2 Common Screen Command Buttons
The following table shows common command buttons found on many web configurator screens.
Back Click Back to return to the previous screen.
Apply Click Apply to save your changes back to the Prestige.
Reset/Cancel Click Reset or Cancel to begin configuring this screen afresh.
4.3 Using the Wizard to Configure for Internet Access
1. Click Wizard Setup in the main menu to display the first wizard screen.
Select B Channel Usage from the
dropdown box.
In general, this will be Switch/Switch
(default). If you are only using one B
channel (e.g., your router is sharing
the ISDN line with another device),
then select Switch/Unused. If your
second B channel is a leased line,
select Switch/Leased.
In ISDN Data, enter the phone number
(up to 25 digits) assigned to you by
your ISDN service provider. If it’s
necessary to dial an additional number
to reach an outside line, enter it in the
Outside Line Prefix field.
Enter the subaddress and telephone
number assigned to A/B Adapter 1/2
(PHONE1/2).
The Incoming Phone Number Matching setting governs how incoming calls are routed.
If you select Multiple Subscriber Number (MSN) or Called Party Subaddress, a call (either ISDN data or analog) is
routed to the port that matches the dialed number; if no match is found, the call is dropped. Global calls are always
ignored. A global call is an incoming analog call where the switch did not send the dialed number. This happens most
often when the call originates from an analog telephone line.
If you select Don’t Care, then all data calls are routed to the Prestige itself. Analog calls, however, are routed to either
A/B adapter 1 or 2, or simply ignored, depending on the Analog Call Routing field. If Incoming Phone Number
Matching is Don’t Care and Analog Call Routing is either A/B Adapter 1, A/B Adapter 2 or Both, then the Prestige
uses Global Analog Call to decide how to handle global calls. If you set Global Analog Call to Accept, then global
calls are routed to the port according to the Analog Call Routing setting; if you set Global Analog Call to Ignore, then
the Prestige ignores all global calls. If Analog Call Routing is Ignore to begin with, then all analog calls, including
global calls, are ignored.