Filter
Top Products
ZyXEL G-220 v2 User’s Guide
Chapter 3 Wireless Station Mode Configuration 39
3.3.2 Security Settings
When you configure the ZyXEL G-220 v2 to connect to a network with wireless security
activated and the security settings are disabled on the ZyXEL G-220 v2, the screen varies
according to the encryption method used by the selected network.
3.3.2.1 WEP Encryption
Figure 16 Station Mode: Security Settings: WEP
The following table describes the labels in this screen.
Table 6 Station Mode: Security Settings: WEP
LABEL DESCRIPTION
Security Settings
WEP Select 64 Bits, 128 Bits or 256 Bits to activate WEP encryption and then fill in the
related fields.
Select Disable to deactivate WEP encryption.
Encryption Type Select an encryption type. Choices are SHARED and OPEN. Refer to Section 2.3
on page 31 for more information.
Pass Phrase Enter a passphrase of up to 63 case-sensitive printable characters. As you enter
the passphrase, the ZyXEL G-220 v2 automatically generates four different WEP
keys and displays it in the key field below. Refer to Section 2.2.1 on page 28 for
more information.
At the time of writing, you cannot use passphrase to generate 256-bit WEP keys.
Transmit Key Select a default WEP key to use for data encryption. The key displays in the field
below.