Filter
Top Products
Chapter 32 Introducing the Commands
VES-1616F-3x Series User’s Guide
218
32.11.2 Enable Mode
The following table describes the commands available for Enable mode.
show hardware-monitor <C|F> Displays current hardware monitor information with the
specified temperature unit (Celsius C or Fahrenheit F).
0
hardware-version Displays whether the Switch is a VDSL1 (100100 or
10050) or VDSL2 device (5030).
0
ip Displays the IP settings. 0
system-information Displays general system information. 0
ssh <1|2> <[user@]dest-ip> Connects to an SSH server with the specified SSH
version.
0
traceroute <ip|host-name>
[in-band|out-of-band|vlan
<vlan-id>]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a device. 0
help Displays the command help information. 0
Table 79 Command Summary: User Mode (continued)
COMMAND DESCRIPTION P
Table 80 Command Summary: Enable Mode
COMMAND DESCRIPTION P
baudrate <1|2|3|4|5> Changes the console port speed.
Choices are 1 (9600), 2 (19200),
3(38400), 4 (57600) and 5 (115200).
13
boot config Restarts the system. 13
configure Accesses Configuration mode. See
Section 32.11.3 on page 223.
13
copy running-config tftp <ip>
<remote-file>
Backs up running configuration to the
specified TFTP server with the
specified file name.
13
tftp config <index>
<ip> <remote-
file>
Restores configuration with the
specified filename from the specified
TFTP server.
13
flash <ip>
<remote-file>
Restores firmware via TFTP. 13
disable Exits Enable (or privileged) mode. 13
enable Accesses Enable (or privileged)
mode.
13
erase running-config Resets to the factory default settings. 13
exit Exits Enable (or privileged) mode. 13
help Displays help information. 13
history Displays a list of command(s) that you
have previously executed.
13
igmp-flush Clears all IGMP information. 13