Filter
Top Products
Chapter 33 Command Examples
VES-1616F-3x Series User’s Guide
251
33.8 no Command Examples
These are the commonly used command examples that belong to the no group of commands.
33.8.1 no mirror port
Syntax:
no mirror-port
Disables port mirroring on the switch.
An example is shown next.
33.8.2 no https timeout
Syntax:
no https timeout
Resets the https session timeout to default.
An example is shown next. The session timeout is reset to 300 seconds.
33.8.3 no trunk
Syntax:
no trunk <T1>
no trunk <T1> lacp
no trunk <T1> interface <port-list>
where
• An example is shown next.
• Disable the trunk group.
• Disable LAPC on the trunk group.
• Remove ports 17 and 18 from the trunk group.
sysname(config)# no mirror-port
sysname(config)# no https timeout
Cache timeout 300
<T1>
Disables the trunk group.
<T1> lacp
Disables LACP in the trunk group.
<T1> interface <port-list>
Removes ports from the trunk group.
sysname(config)# no trunk T1
sysname(config)# no trunk T1 lacp
sysname(config)# no trunk T1 interface 17, 18