Filter
Top Products
ZyAIR G-220 User’s Guide
Access Point Mode Configuration 3-7
Table 3-3 Station Mode: WEP Key Setting…
LABEL DESCRIPTION
Key Length
Select 64 bit, 128 bit or 256 bit and then fill in the related fields.
Default Key ID Select a default WEP key to use for data encryption.
Key Format
Select either the HEX or ASCII WEP key type.
Key Value #1 … 4 Enter the WEP keys in the fields provided.
If you select 64 bit in the Key Length field.
Enter either 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for
example, 11AA22BB33) for HEX key type
or
Enter 5 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9”
(for example, MyKey) for ASCII key type.
If you select 128 bit in the Key Length field,
Enter either 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for
example, 00112233445566778899AABBCC) for HEX key type
or
Enter 13 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9”
(for example, MyKey12345678) for ASCII key type.
If you select 256 bit in the Key Length field,
Enter either 58 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for
example, 00112233445566778899AABBCC) for HEX key type
or
Enter 29 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9”
(for example, MyKey12345678) for ASCII key type.
You must configure all four WEP keys the first time you use the
ZyAIR.
The values for the WEP keys must be set up exactly the same
on all wireless devices in the same wireless LAN.
ASCII WEP keys are case sensitive.
Apply/Change
Click Apply to save the changes back to ZyAIR, or click Change to start configuring
the fields.