ADCP-75-210 • Issue 1 • March 2007
Page 21
© 2007, ADC Telecommunications, Inc.
Figure 16. C/MCPLR Module Faceplate
Table 10. C/MCPLR Modules Faceplate Components
REF # DESIGNATION DEVICE FUNCTIONAL DESCRIPTION
1 P IN SMA connector Primary In. Receives RF primary reverse path input from primary
antenna
2 D IN SMA connector Diversity In. Receives RF diversity reverse path input from second-
ary antenna
3 P OUT SMA connectors Primary Out. 3 primary outputs (Cell bands A, B, and SMR-A). Each
output being used connects to one RDC electronic module, either in
the same RAN or in the extension RAN if present. Connection is
made using cable 1955000P081
4 D OUT SMA connectors Diversity Out. 3 diversity outputs (Cell bands A, B, and SMR-A).
Each output being used connects to one RDC electronic module,
either in the same RAN or in the extension RAN if present. Connec-
tion is made using cable 1955000P081
5 FLT Red LED Fault. Lights when module has failed and during start-up until mod-
ule has initialized
6 PWR Green LED Power. Lights when module has power
21242-A
2
1
3
5
6
4
DIVERSITY IN
CONNECTOR
PRIMARY IN
CONNECTOR
PRIMARY OUT
CONNECTORS
DIVERSITY OUT
CONNECTORS
FAULT LED
POWER LED
