Crestron C2N-SPWS300 System Power Supply
Operations Guide – DOC. 8190 System Power Supply: C2N-SPWS300 • 15
The System Views lower pane displays the PRO2 system tree. This tree can be
expanded to display and configure the communications ports.
Expanded PRO2 System Tree
C2Net-Device Slot in Configuration Manager
To incorporate the C2N-SPWS300 power supply into the system, drag the C2N-
SPWS300 from the Power Supplies folder of the Device Library and drop it in the
System Views. The PRO2 system tree displays the touchpanel in slot 9 with a default
NET ID of 15 as shown in the following illustration.
NOTE: The first C2N-SPWS300 in a system is preset with a NET ID of 15 when its
symbol is dragged into the upper pane of System Views. Additional units are assigned
different NET ID numbers as they are added.
C2Net Device, Slot 9
Setting the Net ID in Device Settings
Double-click the C2N-SPWS300 icon to open the “Device Settings” window. This
window displays the C2N-SPWS300 device information. If necessary, select the Net
ID tab to change the Net ID, as shown in the following figure.
