A SERVICE OF

logo

Crestron CEN-UPS1250 Uninterruptible Power Supply
“CEN-UPS1250 Device Settings” Window
The ID code specified in the SIMPL Windows program must match the IP
ID of each unit. Refer to “Identity Code” on page 11.
Program Manager
Program Manager is the view where programmers “program” a Crestron control
system by assigning signals to symbols.
The symbol can be viewed by double clicking on the icon or dragging it into Detail
View. Each signal in the symbol is described in the SIMPL Windows help file (F1).
Example Program
An example program for the CEN-UPS1250 is available from the Crestron website
(www.crestron.com/exampleprograms).
Operations & Installation Guide – DOC. 6635A Uninterruptible Power Supply: CEN-UPS1250 19