Uninterruptible Power Supply Crestron CEN-UPS1250
“BANK3 (ANALOG):ON; BANK4 (HI AMP):ON” Screen
BANK3 (ANALOG):ON
BANK4 (HI AMP):ON
The model number and serial number screen displays information about your
CEN-UPS1250.
“MODEL #; S/N” Screen
MODEL#:CEN-UPS 1250
S/N:PB0707130791
The “ENV. TEMPERATURE” screen displays room temperature in both Celsius and
Fahrenheit when the included temperature/RH sensor is connected to the unit. The
values displayed may be rounded.
“ENV. TEMPERATURE” Screen
ENV.TEMPERATURE:
24.50C 76.0F
The “R. HUMIDITY” screen displays the relative humidity when the included
temperature/RH sensor is connected to the unit.
“R. HUMIDITY” Screen
R. HUMIDITY: NOT AVAIL
Setup Screens
You can use the front panel SETUP and up/down arrow buttons to configure (turn
on or off) various functions provided by each CEN-UPS1250 unit. When you press
the SETUP button, the unit functions are displayed in the following order:
1. Audible Alarm
2. Sensitivity
3. Display Dimmer
4. LED Dimmer
5. Go To Battery If <XX Volts
6. Go To Battery If >XX Volts
7. Outlet Delay1
8. Outlet Delay2
9. Low Battery Warning
26 • Uninterruptible Power Supply: CEN-UPS1250 Operations & Installation Guide – DOC. 6635A
