186 Adding and Replacing Parts
8
Install any applicable Mini-Cards (see "Installing a Mini-Card" on
page 173).
9
Install the keyboard (see "Installing the Keyboard" on page 177).
10
Install the hinge cover (see "Installing the Hinge Cover" on page 175).
Palm Rest
CAUTION: Before performing the following procedures, follow the safety
instructions in your
Product Information Guide
.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching a connector on the back panel of the
Tablet-PC.
NOTICE: To avoid damaging the system board, you must remove the main battery
before you begin working inside the Tablet-PC.
Removing the Palm Rest
1
Follow the procedures in "Before You Begin" on page 155.
1 base grip 2 M2.5 x 5-mm screws (2)
1
2
book.book Page 186 Tuesday, May 13, 2008 5:03 PM
