Media Base (Optional) 209
DOCKING CONNECTOR — Allows you to dock your Tablet-PC to the media base (see
"Docking Your Tablet-PC to the Media Base" on page 211 and "Undocking Your
Tablet-PC From the Media Base" on page 212).
Setting Up Your Media Base
CAUTION: The AC adapter works with electrical outlets worldwide. However,
power connectors and power strips vary among countries. Using an incompatible
cable or improperly connecting the cable to the power strip or electrical outlet
may cause fire or equipment damage.
NOTICE: Always use the Dell AC adapter that came with the media base. If you use
any other commercially available AC adapter—or the AC adapter from earlier
models of Dell computers—you may damage the media base or the Tablet-PC.
NOTICE: When you disconnect the Dell AC adapter cable from the Tablet-PC or
media base, grasp the connector, not the cable itself, and pull firmly but gently to
avoid damaging the cable. When you wrap the AC adapter cable, ensure that you
follow the angle of the connector on the AC adapter to avoid damaging the cable.
1
Connect the AC adapter to the AC adapter connector on the media base
and to an electrical outlet.
2
Before you dock your Tablet-PC to the media base for the first time, the
Tablet-PC operating system must have completed its setup process. Do
the following:
book.book Page 209 Tuesday, May 13, 2008 5:03 PM
