A SERVICE OF

logo

194 Adding and Replacing Parts
5
Remove any installed Mini-Cards (see "Removing a Mini-Card" on
page 171).
6
Remove the palm rest (see "Removing the Palm Rest" on page 186).
7
Remove the system board (see "Removing the System Board" on
page 189).
8
Remove the two M2 x 3-mm screws.
9
Remove the pen missing cable and whip antenna cable from their routing
channels, then lift the pen assembly and whip antenna assembly from the
base.
1
3
5
2
4
book.book Page 194 Tuesday, May 13, 2008 5:03 PM