82D-Link DIR-860L User Manual
Section 3 - Conguration
Advanced Wireless
This section will allow you to adjust the settings for the 2.4GHz band
Set the transmission power of the antennas for the 2.4 GHz band.
This enables 802.11d operation. 802.11d is a wireless specication
developed to allow implementation of wireless networks in
countries that cannot use the 802.11 standard. This feature
should only be enabled if you are in a country that requires it.
WMM is QoS for your wireless network. This will improve the
quality of video and voice applications for your wireless clients.
Enable this option to reduce interference from other wireless networks
in your area. If the channel width is operating at 40MHz and there is
another wireless network’s channel over-lapping and causing interference, the router will automatically change to 20MHz.
This section will allow you to adjust the settings for the 5 GHz band.
Set the transmission power of the antennas for the 5 GHz band.
This enables 802.11d operation. 802.11d is a wireless specication developed to allow implementation of wireless networks
in countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it.
WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients.
Wireless Band
Transmit Power:
WLAN Partition:
WMM Enable:
HT20/40
Coexistence:
Wireless Band:
Transmit Power:
WLAN Partition:
WMM Enable:
This page allows you to change some of the advanced wireless settings of the DIR-860L. It is recommended that you only change these settings if
you are familiar with their functions and proper settings, or are instructed to do so.
