85D-Link DIR-860L User Manual
Section 3 - Conguration
To use the Universal Plug and Play (UPnP
™
) feature click
on Enabled. UPnP provides plug and play functionality
with compatible networking equipment, software and
peripherals.
Checking the box will allow the DIR-860L to respond
to pings. Unchecking the box may provide some extra
security from hackers.
Select from the drop-down menu if you would like to apply
the Inbound Filter to the WAN ping. Refer to the Inbound
Filters section for more information.
You may set the port speed of the Internet/WAN port to
10Mbps, 100Mbps, 1000Mbps, or Auto (recommended).
Check the box to allow multicast trac to pass through
the router from the Internet (IPv4).
Check the box to allow multicast trac to pass through
the router from the Internet (IPv6).
Enable UPnP:
WAN Ping:
WAN Ping Inbound
Filter:
WAN Port Speed:
Enable IPV4
Multicast Streams:
Enable IPV6
Multicast Streams:
Advanced Network
This page allows you to change some of the advanced network settings of the DIR-860L. It is recommended that you only change these settings if
you are familiar with their functions and proper settings, or are instructed to do so.
