A SERVICE OF

logo

CONTROL FUNCTIONS 4-9
MON2000
JULY 2010 Initiating an Auto BTU Start Up Run
When the Default CDT/TEV checkbox is
selected, the Valve # and CDT Component
fields are read-only.
5. To use the GC’s existing CDT/TEV tables,
select the Configured CDT/TEV checkbox.
You can enter a valve number in the Valve #
field and select the component number from
the drop-down list of the CDT Component
field in the table below the checkboxes. The
list of components are from the CDT of the
corresponding calibration stream.
It is strongly recommended that you use the Default
CDT/TEV.
neo-Pentane is not available in the CDT Component
drop-down list.