A SERVICE OF

logo

Open as PDF
next previous
Programmer’s Guide, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Programmer’s Guide4-8
Command/response table for SIS commands
Command ASCII Command Response Additional description
(host to switcher) (switcher to host)
Create ties
• Commands can be made back-to-back in a string, with no spaces.
For example: 1*1!02*02&003*003%4*24$.
• The quick multiple tie and tie input to all output commands activate all I/O switches
simultaneously.
• The CrossPoint 450 Plus and MAV Plus support 1-, 2-, and 3-digit numeric entries
(1*1, 02*02, or 001*001).
Tie input
X
2
to output
X
3
, video (V)
X
2
*
X
3
! Out
X
3
•In
X2
•All Tie input
X
2
’s video and audio
and audio (A) to output
X
3
.
Example: 1*3! Out03 •In01•All
Tie input 1 V & A to output 3.
Tie input
X
2
to output
X
3
, RGBHV only
X
2
*
X
3
& Out
X
3
•In
X2
RGB Audio breakaway.
Example (see Note): 10*4& Out04•In10•RGB Tie input 10 RGB to output 4.
Tie input
X
2
to output
X
3
, video only
X
2
*
X
3
% Out
X
3
•In
X2
•Vid Audio breakaway.
Example (see Note): 7*5% Out05•In07•Vid Tie input 7 video to output 5.
The & tie command for RGB and the % tie command for video can be used interchangeably on
the CrossPoint 450 Plus and MAV Plus switchers.
Tie input
X
2
to output
X
3
, audio only
X
2
*
X
3
$ Out
X
3
•In
X2
•Aud Audio breakaway.
Example: 12*24$ Out24•In12•Aud Tie input 12 audio to output 24.
Quick multiple tie
Esc
+Q
X
2
*
X
3
!
…
X
2
*
X
3
!
Qik
Example:
Esc
+Q3*4!3*5%3*6$ Qik Tie input 3 video and audio to
output 4, tie input 3 video to
output 5, and tie input 3 audio to
output 6.
Tie input to all outputs, V & A
X
2
*! In
X
2
•All
Example: 5*! In05•All Tie input 5 video and audio to all
outputs.
Tie input to all outputs, RGBHV only
X
2
*& In
X
2
•RGB
Example (see Note): 28*& In28•RGB Tie input 28 RGB to all outputs.
Tie input to all outputs, video only
X
2
*% In
X
2
•Vid
Example (see Note) : 14*% In14•Vid Tie input 14 video to all outputs.
The & tie all command for RGB and the % tie all command for video can be used
interchangeably on the CrossPoint 450 Plus and MAV Plus switchers.
Tie input to all outputs, audio only
X
2
*$ In
X
2
•Aud
Example: 1*$ In01•Aud Tie input 1 audio to all outputs.
Read ties
Read RGBHV output tie
X
3
&
X
2
RGBHV input
X
2
tied to output
X
3
.
Read video output tie
X
3
%
X
2
Video input
X
2
tied to output
X
3
.
The & read tie command for RGB and the % read tie command for video can be used
interchangeably on the CrossPoint 450 Plus and MAV Plus switchers.
Read audio output tie
X
3
$
X
2
Audio input
X
2
tied to output
X
3
.
Digital Sync Validation Processing (DSVP)
List individual sync frequency
X
1
LS
X15
,
X15
Listed as H freq., V freq.
Example: 2LS 031.50,060.00 Input 2 frequency is 31.5 kHz
horizontal and 60 Hz vertical.
The matrix switcher returns 000.00,000.00 if there is no connection or sync frequencies are not
applicable.