24
Table 3-6 lists and describes the elements in the Port Properties window of an Ethernet port.
Table 3-7 lists and describes the fields in the Port Properties window of an FC port.
Table 3-6: Ethernet Port Properties Window Elements
Element Description
Port field Displays the port number in slot#/port# notation.
Name field Provides a port name that you can edit and apply to the port.
Type field Displays the type of the port.
Admin Status field Provides the up and down radio buttons so you can
configure the administrative status of the port.
Oper Status field Indicates whether or not the port is ready for use.
Auto Negotiation Supported field Displays true if the port supports auto-negotiation
Auto Negotiation field Provides the Enable checkbox so you can enable or disable
auto-negotiation on the port.
Set Port Speed field Provides radio buttons to let you configure the speed of the
port.
Current Speed field Displays the speed of the port.
Set Port Duplex field Provides radio buttons to let you configure the duplex
setting of the port.
Current Duplex field Indicates whether the port runs in full duplex or half duplex
mode.
MTU field Displays the MTU of the port, in bytes.
MAC Address field Displays the media access control (MAC) address of the
port.
Last Changed On field Displays the time and date of the last time that a user
configured the port.
Action field Lets you flush the Address Resolution Protocol (ARP)
table.
Result field Displays the result of the action that you perform from the
Action field.
Apply button Applies the changes that you make in the Port Properties
window to the port.
Reset button Resets the fields in the window to match the properties of
the card.
Close button Closes the window. If you close the window before you
apply changes, CM makes no changes to the card.
Help button Opens on-line help.
Table 3-7: Fibre Channel Port Properties Window Elements
Element Description
Port field Port number, in slot#/port# format.
Name field Provides a port name that you can edit and apply to the port.
Type field Displays the type of the port.
Admin Status field Provides the up and down radio buttons so you can
configure the administrative status of the port.
