Ethernet 10/100 BaseT (TCP/IP)
Ethernet 10/100 BaseT (TCP/IP) attachment is supported on PSF/400, PSF for AIX, and Infoprint Manager
for AIX printing environments. An Ethernet Adapter Card is supplied with Specify Feature number 9993
and Special Feature number 4165. The adapter card is installed in the IBM Infoprint 3000-ES1 and ED2
AFCCU processors. The IBM Infoprint 3000-ES1 and ED1/ED2 may then be attached to an Ethernet LAN.
v 10/100 BaseT LAN using Twisted Pair Cabling
– IBM supplies a Twisted Pair wrap plug (PN 00G2380)
v Installation Instructions are provided with the features.
FDDI (TCP/IP)
FDDI (TCP/IP) attachment is supported on PSF for AIX and Infoprint Manager printing environments and
for selected RS/6000 models. The Infoprint 3000-ES1 and 3000-ED1/ED2 are connected to the host FDDI
through FDDI 62.5/125 multimode fiber cabling using SC connectors via the FDDI Single Station adapter,
which is contained in the AFCCU. The FDDI (TCP/IP) attachment will attach to the following devices:
v Directly to RS/6000
v 8260 Multiprotocol Intelligent Switching Hub attached to an RS/6000 processor
The printer may be located at a maximum distance of 2 Kilometers from the 826 Multiprotocol Intelligent
Switching Hub or RS/6000 processor.
Chapter 13. Infoprint 3000–ES1 and –ED1/ED2 Printers (3300) 77
