iVIEW-100 Series user’s Manual, 2006, v2.0 ----- 169
(INPUT)lTimeout: unit is ms. (*****)
(OUTPUT) cCmd: response from COM port(I-7000/I-87K).
(INPUT) iChksum: 0: disable, 1: enable.
*/
/* for ALL COM PORT */
int printCom(int port,char *fmt,...);
int IsDetectBreak(int port);
int SendBreak(int port,unsigned timems);
int SetBreakMode(int port,int mode);
int ClearCom(int port);
int ClearTxBuffer(int port);
int InstallCom(int port, unsigned long baud, int data, int parity,int stop);
int ToComBufn(int port,char *buf,int no);
int RestoreCom(int port);
int ToComStr(int port,char *str);
int DataSizeInCom(int port);
int IsCom(int port);
int ReadComn(int port,unsigned char *buf,int n);
int ReadCom(int port);
int SetBaudrate(int port,unsigned long baud);
int ToCom(int port,int data);
int IsTxBufEmpty(int port);
int GetTxBufferFreeSize(int port);
int WaitTransmitOver(int port);
int SetRtsActive(int port);
int SetRtsInactive(int port);
int GetCtsStatus(int port);
/* function table for up functions except printCom */
/*
For example if want to call:
if(IsCom(port)){
data=ReadCom(port);
}
also can use :
if(IsCom_[port]()){
data=ReadCom_[port]();
