Lexmark 4059-XXX Manual

A SERVICE OF

next previous

Repair Information 4-34

4059-XXX

High Voltage Power Supply

1. Remove the inner paper deflector.

2. Remove the toner sensor cable from the retainer (A) on the front

of the HVPS.

3. Remove the right side cover.

4. Disconnect the JVPS cable from the HVPS at connector (C).

5. Disconnect the transfer roll cable from the HVPS board.

Note: Use caution when disconnecting the cable from the

transformer on the HVPS. The cable and connector can be

easily damaged.

6. Remove the HVPS mounting screw (B).

7. Slide the HVPS to the left to release the mounting tab and

remove the HVPS.