97 96
General Printing Overview
MASTERFORM prints two forms: the UPS
Hazardous Materials (hazmat) Shipping Paper
(on tractor or laser form) and the Shipper’s
Certification end-of-day log.
Form 1: Hazmat Shipping Paper
The hazmat shipping paper is available as an
8-part carbon form or as a single-sheet laser
form. Both forms are only available through UPS.
Form 2: Shipper’s Certification
The Shipper’s Certification is generated by
MASTERFORM and prints on plain, blank 8
1/2
x 11
inch paper. No special settings are required.
Printers
• If you use the 8-part carbon form for the hazmat
shipping paper, it is recommended that you use
two printers with MASTERFORM: a dot matrix for
the carbon form and a laser or inkjet printer for
the Shipper’s Certification.
• If you use the new single-sheet laser form, a
laser-jet printer is recommend. Inkjet and
bubble-jet printers are NOT recommended.
Labelmaster cannot support, endorse, or
recommend any printer. We have, however, used
certain Lexmark and Okidata printer models with
MASTERFORM and so we have provided special
instructions to help you use these models as well.
Look for special Lexmark and Okidata instructions
in the following sections of this book:
Changing the printer driver
Changing the Emulation Mode on the printer (tractor)
Printing gibberish or strange symbols
Printer feeds forms up too far
