113 112
Add or remove lines from the
printed form
You can put up to three materials on a shipping
paper and if you are using the 8-part carbon form,
MASTERFORM can print lines in between each
material on your shipping paper for clarity. If you
want lines between each material, make sure the
Print Data Only check box in Page Setup is not
selected.
When you come to the print preview of your form,
choose Page Setup from the File menu. Then
deselect the Print Data Only check box and click
OK.
Figure 11 on page 41 shows the Page Setup
window.
Increase or decrease the size
of printed text
Use the Nudge dialog to increase or decrease the
size of any individual portion of text:
1. Complete the form-fill wizard, provide all
required information, and arrive at the Print
Preview or Print and Save Shipment Template
screen.
2. If the Print Preview is not already loaded,
choose Print Preview from the File menu.
When the preview is loaded, open the Nudge
dialog by selecting Settings from the View
menu.
3. Click the New button and name the new
settings you are about to create. Click OK. If
you want to save settings, you must give
them a name. Delete a setting by selecting
the setting name and then clicking the Delete
button.
4. Move the highlight box to the field you want
to adjust by clicking the Next and Previous
buttons. The highlight will move around the
form in sequence.
Once the desired text field is highlighted, use the
two A buttons to increase or decrease the font
size of that text.
If you want to save the changes you have made,
click Save and name your settings.
