CDM-Qx Satellite Modem Revision 5
Front Panel Operation MN/CDMQx.IOM
5–76
If the user selects Select, the following sub-menu is displayed:
The top line shows the current active image. On the bottom line the user may select,
using the
◄ ► arrow keys and ENT key, the image that will be active the next time the
unit is re-booted.
If Update-CPLD is selected, the following sub-menus are displayed:
Programming the CPLD requires only one card to be installed in the chassis. If this rule
has been exercised, this next menu will appear.
Where v1.x.x is version number. Before selecting Yes, please check the current version
of the CPLD programmed on the Tx or Rx card
(UtilityFirmwareInformationCPLD). Select Yes if you want to update it to the
latest version and the following sub-menu is displayed:
Every time CPLD programming is done (whether successful or not), always CYCLE
power if another card is to be programmed.
Current Active Image: #1
Next Reboot Image: #1 #2
Update CPLD to v1.x.x?
No Yes (◄ ► ENT)
RULE: Only one card must
e
installed in the chassis!
Programming CPLD . . .
. . . PLEASE WAIT!
