CDM-Qx Satellite Modem Revision 4
Remote Control MN/CDMQx.IOM
C-25
Parameter
Type
Command
(Instruction
Code and
qualifier)
Arguments
for Command
or Response
to Query
Description of arguments
Response
to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to query
(Target to
Controller)
Configuration
Save
CST= 1 byte Command only
Causes the CDM-QX to store the current unit configuration
(common functions and all four slots) in Configuration
Memory location defined by the 1-byte argument (0 to 9)
Example: CST=4 (store the current configuration in
location 4)
CST=
CST?
CST*
CST#
CST^
N/A N/A
Configuration
Load
CLD= 1 byte Command only
Causes the CDM-QX to retrieve a previously stored unit
configuration (common functions and all four slots) in
Configuration Memory location defined by the
1-byte argument ( 0 to 9)
Example: CLD=4 (retrieve unit configuration from
location 4)
CLD=
CLD?
CLD*
CLD#
CLD^
N/A N/A
ReCenter
Buffer
RCB= None Command only
Forces the software to recenter the receive
Plesiochronous/Doppler buffer.
Note: This command takes no argument.
Example: RCB=
RCB=
RCB?
RCB*
RCB#
RCB$
RCB^
RCB@
N/A N/A
RTC Date DAY= 6 bytes Command or Query
A date in the form ddmmyy, where:
dd=day of the month (01 to 31)
mm=month (01 to 12)
yy=year (00 to 99)
Example: DAY=240457 (April 24, 2057)
DAY=
DAY?
DAY*
DAY#
DAY^
DAY? DAY=ddmmyy (see
description of
arguments
