A SERVICE OF

logo

Open as PDF
next previous
CDM-Qx Satellite Modem Revision 5
Ethernet Management (Base Modem) MN/CDMQx.IOM
11–12
There is a disadvantage when using Windows DOS as Telnet Client. Since Windows
DOS cannot translate a ‘\r’ to a ‘\r\n’ for the messages coming from Telnet Server, the
multi-line command response (for example, FRW? Response) will be displayed as one
line, with the latter lines overwrite the previous lines.
In order to view the full response messages, we recommend using HyperTerminal
configured as Telnet Client. To do so, configure the HyperTerminal as following:
1. Connect using TCP/IP instead of COM1 or COM2;
2.
ASCII setup: check both "Send line ends with line feeds" and "Append line feeds to
incoming line ends" options.
See the following screen captures for examples.