Nortel Switched Firewall Browser-Based Interface Users Guide
90 Browser-Based Interface forms reference
216383-D October 2005
Fields and buttons on the form are as follows:
General
Status provides a list with these selections:
o Enabled indicates that Check Point FireWall-1 NGX is processing on the
Firewall.
o Disabled indicates that Check Point FireWall-1 NGX is not processing on the
Firewall.
Update submits the changes to the pending configuration.
Smart Update Management
Status provides a list with the following two selections:
o Enabled indicates that Check Point SmartUpdate software updating is enabled.
TIP: Disable SmartUpdate management when software update is complete.
o Disabled indicates that Check Point SmartUpdate software updating is disabled.
Update submits the changes to the pending configuration.
Secure Internal Communication is used to establish Secure Internal Communications
(SIC) between the management station and the Firewall.
List of Hosts lists the Firewall hosts by IP address.
Password provides a field to enter the Check Point SIC password. TIP: This
password differs from the login password.
Password (again) provides a field to reenter and confirm the Check Point SIC
password.
Reset SIC resets SIC for the Firewall.
