3.8
Copying
Contrast
You can adjust the contrast for a document containing faint
markings or dark images or photographs using the
Contrast
button. You can select “LIGHTEN”, “DARKEN”, “PHOTO” or
“NORMAL”. LIGHTEN is good for documents containing dark
images. NORMAL works well with a standard document. DARKEN
works well with light print or faint pencil markings. Choose PHOTO
if you are copying a photograph.
To select the contrast:
1
Press
Contrast.
The current setting is tagged with a at the
end of the display.
2
Scroll through the options available by pressing Contrast
repeatedly or using the Scroll buttons ( or ).
3
When the desired mode is displayed, press
Enter
to save the
selection.
Copy page
You can select the number of copies, from 1 to 99. To change the
number of copies:
1
Press
Copy page
. The current setting is tagged with a at
the end of the display.
2
Change the number of copies using the Copy page button or
Scroll buttons.
Each time you press
Copy page
, the number is increased by
1. If you press and hold Copy page, the number is increased
in steps of 10.
To increase or decrease the copy number by 1, use the
Scroll
buttons ( or ). If you press and hold the
Scroll
buttons
( or ), the number increases/decreases in steps of 5.
3
When the desired quality is displayed, press Enter to save the
selection.
