A SERVICE OF

logo

Open as PDF
next previous
Chapter 11: Command Line Interface 201
SWITCH PARAMETER DEFINITION STATUS EXAMPLE
-p
UDP PORT PORT THROUGH
WHICH ALL
UDP
COMMUNICATIONS
WILL FLOW
–
NAMELY FOR SNMP
OPTIONAL
DEFAULT: 161
-d
DATE LOCAL DATE OPTIONAL
21/04/2002
-t
TIME LOCAL TIME OPTIONAL
13:30
-c
CONTACT CONTACT PERSON
IN THE EVENT OF A
SYSTEM
MALFUNCTION
OPTIONAL
AnnaLevin
-loc
LOCATION LOCATION OF THE
CONTACT PERSON
OPTIONAL
ext4838
-if
MANAGEMENT
INTERFACE ALIAS
MANAGEMENT PORT
NAME
MANDATORY
ETH1
eth1
-rld
REPORT LUN
DISCOVERY
MODE FOR
DISCOVERING
DEVICE
LUNS
MANDATORY
YES OR NO
DEFAULT: YES
no
Example
device set –n VSwitch1 –ip 212.199.43.46 –d 21/04/2002 –
t 13:30 –c AnnaLevin. –loc ext4838 –if eth1 –rld no
device set -telnet
This command changes the Telnet port from the default port number to a
user defined port number. Establishing a Telnet connection on an alternate
port (not the expected port 23) provides increased line security.
device set -telnet
Example
device set -telnet 49155
fc interface show
This command shows each FC port and its World Wide Port Name
(WWPN).
fc interface show
Alias WWPN
fc2 20:00:00:20:38:00:10:64