26 SANRAD V-Switch User Manual
STEP 4. ATTACH THE REAR L-BRACKET
If a single V-Switch is being mounted, attach the rear L-bracket to the left side
of the V-Switch.
If dual V-Switches are being mounted, attach a second rear L-bracket to the
right side of the right V-Switch as well.
STEP 5. ATTACH THE V-SWITCH 2000 TO THE RACK MOUNTING POSTS
Insert the rear of the V-Switch 2000 between the rack mounting posts until the
L-bracket(s) touch the rack mounting posts.
Align the mounting holes on the rear L-brackets with the mounting holes on the
rack mounting posts.
Using screws that you provide, attach the V-Switch 2000 to the rack mounting
posts by screwing two screws on each side through the L-brackets and into the
threaded holes in the rack mounting posts.
Once the V-Switch 2000 is mounted, you can begin connecting the requisite
cables.
