Sample Configurations 259
STEP 6. SYNCHRONIZE MIRROR
Use the CLI command volume mirror synch to synchronize the new
volume data with its intact mirrored volume, Simple3. Once you execute this
command, the new mirrored volume will be fully functional.
volume mirror synch –src Simple3 –dst Simple5
The synchronization is finished when the volume status of Simple5 changes
from NeedSync to Exposed.
STEP 7. REMOVE FAILED VOLUME
Use the CLI command volume remove all to remove the non-functional
virtual volume from the V-Switch database.
volume remove all –vol Simple4
STEP 8.
REMOVE FAILED DISK
Use the CLI command volume storage remove to remove the failed disk
from the V-Switch database.
storage remove –s Stor_4
Use the CLI command storage show to view the updated storage disk
table.
Table 68: Failed Storage Disk Removed
Alias Entity Name LUN Oper. Status Subdisk
Stor_1 500507606058c90 0 Enabled entire
Stor_2 2000002037f88fb8 0 Enabled entire
Stor_3 2000002037c32b1f 0 Enabled entire
Stor_5 500708206059f880 0 Enabled entire
