Chapter 10. AP Operation
121
(Continued from previous page.)
A description of the Connection Screen is given in the following table:
Menu Bar The Menu Bar contains three items: File, Tools, and Help.
The File Menu allows the operator to Create, Save, and
Open user created Work files (see page 122 for details).
The Tools Menu contains two entries: Keyboard and
Config, (see page 122 for details).
Server List Each time the WinClient.exe file is run, it searches the User's
local LAN segment for B020-008-17-IP units, and lists
whichever ones it finds in this box. If you want to connect to
one of these units, double-click it.
Server This area is used when you want to connect to a B020-008-
17-IP at a remote location. You can drop down the IP list box
and select an address from the list. If the address you want
isn't listed, you can key in the IP address you want. Then, key
in the Port number in the Port field. If you don't know the Port
number, then contact the Administrator.
When the IP address and Port number for the unit you wish to
connect to have been specified, Click Connect to start the
connection. When you have finished with your session, Click
Disconnect to end the connection.
Message List Lists status messages regarding the connection to the B020-
008-17-IP.
Switch to Remote View Once contact with a B020-008-17-IP has been established,
this button becomes active. Click it to switch and take over
console control of the unit that is attached to the B020-008-
17-IP.
The screen output of the unit appears on your monitor. Your
keystrokes and mouse movements are captured and sent to
the B020-008-17-IP to be executed on the attached unit.
If the B020-008-17-IP is connected to a KVM switch, you can
control the switch and the computers connected to it just as if
you were connected locally.
Change Password This button becomes active after a connection to a B020-008-
17-IP unit has been established. It allows the User to change
the password used to log in to the B020-008-17-IP.
