Filter
Top Products
76
LEDs
LED overview
The 2Wire Gateway has numerous indicator lights that can be used to diagnose installation and connection
problems. The following table describes how to interpret the indicator lights.
Power LED
Solid green The gateway is powered on.
Off The gateway is not receiving power.
Flashing red Power-On Self-Test (POST) is in progress.
Solid red POST failure (not bootable), or a gateway malfunction
occurred.
Local Ethernet, Wireless,
USB - PC, or MoCA LEDs
Solid green The device has established a link.
Off The device is not connected.
Broadband LED
Solid green Broadband connection established via DSL or
Ethernet.
Off No physical signal detected.
Flashing green Attempting broadband connection.
Flashing red No broadband signal (Ethernet or DSL) detected on
line.
Flashing green and red The gateway has been unable to establish a
broadband connection for more than three
consecutive minutes.