Filter
Top Products
Changing Software Settings B-3
5 When the auto installation screen appears, as shown in
Figure 3-1 press [Enter].
6 When the main menu appears with a list of options, as
shown in Figure 3-2, select Configuration/Diagnostic/
Troubleshooting.
7 When the Configuration and Diagnostic screen appears,
select Configuration and Diagnostic Program.
8 Do one of the following:
a If you have multiple adapters installed, as shown in
Figure B-1, use the arrow keys to select the desired
adapter and press [Enter]. When the Configure Adapter
option is highlighted on the Install pull-down menu,
press [Enter] again.
b If you have a single adapter installed, the Configure Adapter
option appears already highlighted on the Install pull-down
menu. Press [Enter].
Figure B-1 Multiple Adapter Option Configuration33
Select Adapter
Select Cancel
Select the adapter to be configured and/or tested.
[ENTER]=<Select>
[Alt]+<Highlighted Key>=Execute Function [
-¯
]=Scroll
[TAB]=Next Field [SHIFT+TAB]=Previous Field [F1]=Help [ESC]=<Quit>
Installed Adapters
3C595-T4 PCI Dev./Slot 12 Node Address = A2 00 A2 00 A2 22
3C595-T4 PCI Dev./Slot 14 Node Address = A2 00 A2 00 A2 20
InstallQuit View Select F1=HelpTest
Configuration and Diagnostic Program
(C) Copyright 1995, 3Com Corporation. All Rights Reserved