Filter
Top Products
10-Port 100BASE-FX and 20-Port 10/100BASE-TX Fast Ethernet Layer 2 Switching Modules Quick Start Guide
7
■ In the 16-slot chassis:
■
Do not install the module in slot 8 or slot 9. These slots are
reserved for GEN Switch Fabric Modules.
■
Install the module in slot 1, 2, 3, 4, 5, 6, 7, 10, 11, or 12.
■
3Com recommends that you do not install the module in slot 13,
14, 15, or 16 because these slots have only one connection to the
GEN Switch Fabric Module.
■ Table 1, Table 2, and Table 3 list the relationship between the
following:
■ 24-port GEN Switch Fabric Module (SFM) (Model Number 3CB9FG24
or Model Number 3CB9FG24T)
■ 10-port 100BASE-FX FEN Switching Module
■ Switching module slots in the 7-slot chassis, 8-slot chassis, and 16-slot
chassis, respectively
Table 4, Table 5, and Table 6 list the relationship between the following:
■ 24-port GEN Switch Fabric Module (SFM)
■ 20-port 10/100BASE-TX FEN Switching Module
■ Switching module slots in the 7-slot chassis, 8-slot chassis, and 16-slot
chassis, respectively
Table 7 and Table 8 list the relationship between the following:
■ 9-port GEN Switch Fabric Module (SFM) (Model Number 3CB9FG9)
■ 10-port 100BASE-FX FEN Switching Module
■ Switching module slots in the 7-slot chassis and 8-slot chassis,
respectively
Table 9 and Table 10 list the relationship between the following:
■ 9-port GEN Switch Fabric Module (SFM)
■ 20-port 10/100BASE-TX FEN Switching Module
■ Switching module slots in the 7-slot chassis and 8-slot chassis,
respectively
Use the table information to help select a slot for your module, as well as
administer the system after you have completed the installation.