Filter
Top Products
11.1 Software Packages 21
NETBuilder II Firmware Requirements
The NETBuilder II I/O modules require firmware upgrades to support the
NETBuilder software version 11.1 (see Table 5 for firmware requirements).
You can determine your I/O module firmware version through the software by
entering:
SHow -SYS IOI
Frame Relay X X X X
SMDS X X X X
X.25 X X X X
X.25 switching/tunneling X X X X
IBM Protocols
APPN X
DLSw X X X X
BRITSS X X X X
LAA X X X X
LNM X X X X
Polled ASYNC/
BISYNC Passthrough
X X X X
NetView Service Point X X X
SDLC X X X X
SHDLC X X X X
BSC conversion X X X
QLLC/LLC2 conversion X X X
Other Features
FTP X X X X
Data over Voice
MPOA X X X X
ASCII Boot X X X X
Zmodem X X X X
Dial-on-demand X X X X
Web Link X X X X
Virtual Ports (512 max.) X X X X
ISDN X X X X
TIFE X X X X
Table 4 NETBuilder II Software Features (continued)
Software Package
Feature
APPN/Connection
Services (AC)
Multiprotocol Router (DW)
Multiprotocol
Router with 56-bit
Encryption (DE)
Multiprotocol Router
with 128-bit
Encryption (DS)
Table 5 NETBuilder II Firmware Requirements
Module 11.1 Firmware Version Strings
DPE FW/DPE-BOOT1,1.4
FW/DPE-BOOT2,1.4
MP 6-port Ethernet FW/6ETH-FW,1.4.0.70
Fast Ethernet 100Base FW/ETH100-FW,1.9
BRI 8-port FW/8BRI-FW,1.2
MP ATMLink FW/ATM-FW,1.1.0.70