Filter
Top Products
30 NETBUILDER SOFTWARE VERSION 11.1 RELEASE NOTES
Item Not Supported The NETBuilder software version 11.1 does not support the following
bridge/routers:
■ SuperStack II NETBuilder 227 Full Router (Ethernet)
■ SuperStack II NETBuilder 427 Router (Ethernet, ISDN)
NETBuilder Upgrade
Management Utilities
This section includes information about NETBuilder software version 11.1
NETBuilder Upgrade Management Utilities. Upgrade Link is a graphical
interface-based application designed to simplify upgrading the NETBuilder
bridge/router operating software.
The NETBuilder software version 11.1 NETBuilder Upgrade Management Utilities
support upgrades from NETBuilder bridge/routers running version 8.x through
11.0.1. If you need to upgrade from version 7.x to 11.1, you need to perform the
upgrade in two steps. The first step requires upgrading from 7.x to 9.3.1. After the
NETBuilder bridge/router configuration files have been converted to 9.3.1, they
can then be further upgraded to support the 11.1 release. The 9.3.1 Remote
Upgrade Utilities and manual are available on the 3Com InfoDeli website.
Downloading
NETBuilder Upgrade
Management Utilities
The NETBuilder Upgrade Management Utilities is shipped on the CD-ROM with
every NETBuilder software release. In addition, the NETBuilder Upgrade
Management Utilities can be downloaded from the FTP site (ftp.3com.com), from
the World Wide Web access through http://infodeli.3com.com/, or from the 3Com
bulletin board service (BBS) under Software Downloads, System Software. The files
range in size from 1 MB to 4 MB per file and are usually easier and faster to
retrieve using the FTP site.
UNIX Files The NETBuilder Upgrade Management Utilities are UNIX files compressed with
the UNIX compress utility. To use the downloaded files, you must first expand
the files using the UNIX decompress utility. For instructions on how to download
and decompress the utilities, see the ruu111.txt file.
The UNIX files are as follows:
Windows Files The NETBuilder Upgrade Management Utilities are Windows files compressed
with a compression utility. To use the downloaded files, you must first expand
them using the decompress utility PKUNZip. PKUNZip can be downloaded from
the following URLs:
http://www.pkware.com
ruusol111.1 Contains the UNIX-compressed NETBuilder Upgrade Management
Utilities for the Solaris 2.5 platforms.
ruuhp111.1 Contains the UNIX-compressed NETBuilder Upgrade Management
Utilities for the HP-UX 10.x platforms.
ruuaix111.1 Contains the UNIX-compressed NETBuilder Upgrade Management
Utilities for the IBM AIX 4.1.1 through 4.2.X platforms.
ruu111.txt Contains the instructions for downloading and decompressing
the NETBuilder Upgrade Management Utilities. This file also
contains instructions on how to integrate the utilities into the
Transcend Enterprise Manger application.