3Com 11.1 Network Router User Manual


 
32 NETBUILDER SOFTWARE VERSION 11.1 RELEASE NOTES
Upgrade Management
Known Issues
This section contains known upgrade management issues.
bcmdiagnose Error
Message
When you execute bcmdiagnose on HP-UX and the TFTP server is configured to
use the Safe Directory method, the error message "No TFTP user found in
/etc/passwd. You must add an entry" can be ignored.
Installation of a new version of the Remote Upgrade Utilities onto a UNIX NMS
saves an existing /usr/3Com/bcmutil.conf, into /etc/3Com/bcmutil.conf.backup.
This file is used by the Transcend Enterprise Manager for UNIX (TEM/U). If a user
has made modifications to this file, they must either restore their original file or
add the changes to the new file.
If you are using the Remote Upgrade Utilities in stand-alone mode or with the
Transcend Enterprise Manager for UNIX (TEM/U), you can specify SNMP
community strings of different devices in /etc/snmp.cfg file. More information
about the snmp.cfg file can be found in the help pages
(file://usr/3Com/bcm/gui/hlp/bcm-intro.html).
Unreleased Netscape
Communicator Version
The NETBuilder software version 11.1 Upgrade Management Utilities requires an
unreleased version of Netscape Communicator, 4.05 Preview Release 1 (AWT
1.1.5). This version may be obtained from the following Netscape web site:
http://home.netscape.com/download
SuperStack II NETBuilder
Token Ring Upgrades
If SuperStack II NETBuilder systems that are running software version 8.3 have a
boot image named “bundle.68K,” the SuperStack II NETBuilder Token Ring system
is not upgradable to software version 11.1 unless the sys file is present on the flash
drive. To work around this, either rename the image to “boot.68k,” or copy the
8.3 sys file to the primary boot directory on the NETBuilder bridge/router.
Sysupgrade Not
Supported
Sysupgrade is no longer a supported upgrade management utility. Use of the files
upgrade.29k and upgrade.68k is not supported in this release.
IP Address Link When using the Upgrade Management Utilities in a hardware replacement
upgrade, you must use the same IP address as previously used for the router if you
have already backed up your software onto the network management station.
Using a different IP address causes the upgrade to fail.
Concurrent Usage The NETBuilder Upgrade Management Utilities are currently designed to run
sequentially. Running multiple simultaneous instances of bcmbackup,
bcmsysupgrade, bcmrestore, and bcmdiagnose is not supported at this time.
bcmdiagnose and HP-UX If you are using HP-UX and have difficulties passing the tftp portion of
bcmdiagnose, you may need to modify the /etc/passwd file. Follow the
instructions printed during bcmsetup. You may need to add the following line to
the /etc/passwd file:
tftp::510:200:,,,:/tftpboot:/bin/false
See the HP-UX tftpd man page for more information.
bcmfdinteg Read the following warning regarding the bcmfdinteg utility.