Filter
Top Products
69
SR SERVICE PARAMETERS
11.1 Release Notes, Reference for NETBuilder Family Software
Place this page in front of Chapter 69.
AllRoutes
Syntax FLush [!<port> | !*] -SR AllRoutes [Dec | Hex] [<Transparent | Null | route
segment>] [Discover | Static]
SHow [!<port> | !*] -SR AllRoutes [Dec | Hex] [<Transparent | Null | route
segment>] [Discover | Static] [<count>]
SHowDefault [!<port> | !*] -SR AllRoutes [Dec | Hex]
Default All routes in the routing table in decimal format
Description The AllRoutes parameter allows routes in the routing table to be flushed or displayed
in decimal or hexadecimal format. The SHowDefault command displays static routes
defined by the ADD -SR ROUte command. The SHow command displays static and
discovered routes.
Dynamically learned routes used by LLC2 do not appear in the routing table. You
cannot display, flush, or delete RIFs used by LLC2.
Values
Dec | Hex Specifies whether decimal or hexadecimal format is used to enter
and display routes. Decimal is the default format.
<Transparent |
Null |
route segment>
Limits the routes displayed or flushed to only Transparent routes,
Null routes, or routes that contain the entered route segment.
A route segment is a series of alternating ring and bridge
numbers:
:<ring number> & <bridge number>
The colon (:) precedes the ring number; the ampersand (&)
precedes the bridge number. The following is an example of a
route segment where the frame travels from ring 25 via bridge 2
to ring 4:
:25&2:4
Discover | Static Discover specifies only dynamic routes learned through the route
discovery process are flushed or displayed. Static specifies only
manually configured routes using the ADD ROUte command are
flushed or displayed.
<count> Specifies the number of entries to be displayed.