Filter
Top Products
60
RSVP SERVICE PARAMETERS
11.1 Release Notes, Reference for NETBuilder Family Software
Replace Chapter 60 with this chapter.
This chapter describes the Resource Reservation Protocol (RSVP) Service
parameters. RSVP is used in multicasting applications like video conferencing,
multimedia, and virtual private network (VPN) network management. RSVP
permits host applications to request Quality of Service from the network.
CONFiguration
Syntax SHow -RSVP CONFiguration
Default None
Description The CONFiguration parameter displays all RSVP configuration information for a
PPP/Frame Relay port. The amount of bandwidth configured for RSVP via the PORT
Service parameter, PROTocolRsrv, is displayed.
CONTrol
Syntax SETD -RSVP CONTrol = ENable | DISable
SHow -RSVP CONTrol
Default DISable
Description The CONTrol parameter specifies whether the RSVP capability is enabled. If RSVP is
disabled, all RSVP messages are forwarded as IP data packets.
Table 2 RSVP Service Parameters and Commands
Parameters Commands
CONFiguration SHow
CONFiguration SETDefault, SHow
MaxFlowRate SETDefault, SHow
REQuest SHow
RESerVation SHow
UDPEndcap SETDefault, SHow