Filter
Top Products
33
IPSEC SERVICE PARAMETERS
11.1 Release Notes, Reference for NETBuilder Family Software
Replace Chapter 33 with this chapter.
This chapter describes the IPSEC Service parameters. Table 1 lists the IPSEC Service
parameters and commands.
CONFiguration
Syntax SHow -IPSEC CONFiguration
Default No default
Description The CONFiguration parameter displays all the currently configured IPSEC policies
and key sets.
CONTrol
Syntax SETDefault [!<portlist>] -IPSEC CONTrol = [Enable | Disable]
SHow [!<portlist>] -IPSEC CONTrol
Default Disable
Description The CONTrol parameter enables or disables IPSEC policy checking on a list of ports.
You should only enable IPSEC policy checking on ports that need IPSEC protection.
Enabling IPSEC policy checking can decrease the performance of your
bridge/router.
KeyEncryptionKey
Syntax SETDefault -IPSEC KeyEncryptionKey = "<encrypt_key>|%<encrypt_key>"
SHow -IPSEC KeyEncryptionKey
Table 1 IPSEC Service Parameters and Commands
Parameters Commands
CONFiguration SHow
CONTrol SETDefault, SHow
KeyEncryptionKey SETDefault, SHow
KeySet ADD, DELete, SHow
ManualKeyInfo ADD, DELete, SHow
manualPOLicy ADD, DELete, SHow